Lamp broken
If you get this alarm, your LED lighting is likely to be broken or not…
Continue Reading12/02
-
-
12/02
The motor is jammed
The alarm indicates that the motor is drawing unusually high current and is likely to…
Continue Reading -
12/02
The motor is running light
The alarm indicates that the spreader motor runs easier than normal, probably due to that…
Continue Reading -
12/02
Motor not connected
No current was measured when the spreader motor was running, indicating that the motor is…
Continue Reading -
12/02
Critical battery level
The battery that supplies the FeedCon box with power is almost completely empty and needs…
Continue Reading -
12/02
Low battery
The battery trying to power the FeedCon box is running out and needs to be…
Continue Reading -
12/02
FeedCon has restarted
If you receive this alarm, the FeedCon system has been restarted. If this was an…
Continue Reading -
12/02
FeedCon inactive
If you get this alarm and are not able to visit your FeedCon, wait 24…
Continue Reading -
12/02
Calibration failed
This alarm indicates that the calibration run failed. Check that the battery and the motor…
Continue Reading -
12/02
What is the total height of the feeders?
250 liters – 195 cm (6,4 feet) 500 liters – 205 cm (6,7 feet) 1000…
Continue Reading